Speaker and Headphone Test

Play short, labelled left, right or stereo signals at a low default gain.

On-device No sign-up Free to use

Create audio signal report controls

5%
?

Start with low system volume. Each click plays a one-second 440 Hz signal; system and headphone settings still apply.

Processed in your browser. Your inputs stay on this device.

Showing an example. Change the fields, then use create audio signal report to update it.

Result

Showing an example.

Request a left-channel test signal.

A one-second 440 Hz tone is routed to the left browser output channel; actual sound depends on device settings.

Loading the tool. Your result will appear here.

https://usefreetools.net/speaker-headphone-test · 20 November 2026

Was this helpful?

How to use Speaker and Headphone Test

  1. Lower your device’s system volume and start with the default 5% test gain.
  2. Play the left, right or both-channel signal and listen to the labelled side.
  3. Use Stop audio when needed, then create a report of the requested signals.

Example: Speaker and Headphone Test

Request a left-channel test signal.

You add
Leave test gain at 5% and press Play left.
You get
A one-second 440 Hz tone is routed to the left browser output channel; actual sound depends on device settings.

Supported inputs and limits

  • Needs Web Audio support and explicit playback.
  • Signal gain is limited to 1–20%, with 5% as the default; system volume and headphones still determine loudness.
  • Signals stop after one second.
  • Mono accessibility settings, hardware or OS mixing can combine channels.
  • The report records requested routing, not measured audibility.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Questions about Speaker and Headphone Test

Why can I hear the left test in both ears?

Mono audio, accessibility settings, device wiring or OS mixing may combine the browser’s output channels.

Does 5% guarantee a safe listening level?

No. It is a low signal gain, but system volume and hardware gain still apply. Begin with low system volume.

Does this record my microphone?

No. It creates a short oscillator signal for playback and never requests microphone access.

Page updated · Project managed by Tony Hines · Report a problem with Speaker and Headphone Test