Audio Trimmer and Cutter

Trim one or several audio ranges, add fades and preview each MP3 or WAV result.

On-device No sign-up Free to use

Trim audio controls

  1. 1 Add files
  2. 2 Arrange/Options
  3. 3 Download

Drop your file here

or choose one from your device

Supported PCM WAV or browser-decodable MP3, M4A, Ogg, WebM, FLAC or AAC. Selected files together: 128 MiB, 600 seconds and 256 MiB decoded samples. PCM WAV retains its rate/channels; other formats decode at 48 kHz and retain mono/stereo channels. Metadata is not copied. Decoder support varies and decoding may use more memory than the compressed size.

    ?

    For example: 0-5, 12.5-20. Creates a separate result for each range in the listed order. Up to 20 ranges and 600 selected seconds total. These ranges replace the start, end and percentage fields. Fades apply to each result.

    ?

    The trimmed section starts here. Drag on the waveform to set both times, or type them here. The seconds fields stay authoritative.

    ?

    Leave empty to keep through the end. Times are rounded to the nearest sample frame.

    ?

    Optional. A 0-100 percentage of the whole recording that replaces the start time above while it is filled in.

    ?

    Optional. A 0-100 percentage of the whole recording that replaces the end time above while it is filled in.

    ?

    MP3 files are much smaller and play everywhere. WAV keeps every sample without compression.

    ?

    Constant bitrate. Higher numbers sound closer to the source and make larger files.

    Result

    Showing an example.

    Remove the first and last quarter of a one-second recording.

    The output contains 24,000 sample frames and lasts 0.500 seconds. Its sample rate stays 48,000 Hz; export uses PCM16.

    Loading the tool. Your result will appear here.

    https://usefreetools.net/audio-trimmer-cutter · 20 November 2026

    Was this helpful?

    How to use Audio Trimmer and Cutter

    1. Choose a supported audio file and review its waveform.
    2. Set start and end by seconds, percentages or waveform selection. For several results, enter Keep ranges in seconds; this replaces the other selection fields.
    3. Set fades and MP3 or WAV output. Fades apply separately to every selected range.
    4. Trim, choose each result in the playback list and check the boundaries before downloading.

    Example: Audio Trimmer and Cutter

    Remove the first and last quarter of a one-second recording.

    You add
    Source: a one-second mono WAV at 48,000 Hz. Start time: 0.25; End time: 0.75; Fade-in: 0; Fade-out: 0. Save as: WAV.
    You get
    The output contains 24,000 sample frames and lasts 0.500 seconds. Its sample rate stays 48,000 Hz; export uses PCM16.

    Options

    Keep ranges
    Use 0-5, 12.5-20 to create separate results in listed order. Up to 20 ranges and 600 selected seconds total. Repeated sections count toward that total.
    Selected result playback
    Choose a rendered file to audition that exact result. Changing a source selection does not update an existing download; run the trim again.

    Supported inputs and limits

    • Supported PCM/float32 WAV retains its 8–96 kHz mono/stereo layout.
    • MP3, M4A, Ogg, WebM, FLAC and AAC require browser decoder support and decode at 48 kHz; support varies.
    • Input: 128 MiB, 600 seconds and 256 MiB decoded samples.
    • Export is MP3 (128 to 320 kbps) or 16-bit PCM WAV, without original metadata.
    • Sample rounding can move a boundary by a sample.
    More details

    Native decode may use more memory than the compressed file and cannot stop immediately.

    WAV export refuses decoded samples outside the PCM range.

    Where your input is processed

    This tool does not upload your inputs. See the limits for anything saved on your device.

    Why a boundary may move by a sample

    At 48,000 Hz, adjacent frames are about 0.0000208 seconds apart. The entered times select whole frames rather than fractions of one. A cut can click if its first or last sample differs sharply from the neighbouring silence. Short fades can soften that boundary, but they also change the selected audio.

    Check what the export retains

    A WAV download preserves the selected channel layout and sample rate, and higher-precision input is written as 16-bit PCM. An MP3 download is lossy; a source above 48 kHz is resampled to 48 kHz first. Embedded tags are not copied. Keep the source separately when those details matter. A WAV extension alone does not prove support: compressed and extended WAV variants are refused.

    Questions about Audio Trimmer and Cutter

    Is the original file overwritten?

    No. Download a new file after reviewing its range.

    Why can the exact cut differ by a tiny amount?

    Cuts map to sample boundaries at the input sample rate.

    Can I save the trim as MP3?

    Yes. MP3 is the default for the trimmed section. Choose 128 to 320 kbps, or pick WAV for an uncompressed file.

    Page updated · Project managed by Tony Hines · Report a problem with Audio Trimmer and Cutter