How to use Parametric Solid STL Builder
- Choose Cuboid and enter length, width and height, or choose Polygonal cylinder and enter radius and height. Dimensions use millimeters.
- For a cylinder, choose 8 to 256 segments. More segments produce a finer faceted outline; every segment contributes four triangular faces.
- Review Solid dimensions preview. It is a projected wire drawing, including triangle edges, rather than a sliced-print simulation.
- Generate and download solid-cuboid.stl or solid-cylinder.stl, solid-mesh-report.json and solid-dimensions.svg. The report records entered dimensions, bounds, face count, volume and mesh checks.
- Import the STL into your slicer as millimeters. Inspect the imported dimensions and sliced preview, then choose the material and printer settings there.
Example: Parametric Solid STL Builder
Create a 40-by-30-by-20 mm cuboid. Its rectangular volume is 40 × 30 × 20 = 24,000 mm³ and its six faces are represented by twelve triangles.
Options
- Cylinder segments
- A cylinder uses flat triangular facets. More segments give a finer polygonal approximation within the finite limit.
- Units
- The entered dimensions are millimeters. STL itself does not store a measurement-unit label, so set the same units when importing.
Supported inputs and limits
- Cuboid length, width and height range from 1 to 1,000 mm; cylinder radius from 1 to 500 mm, with 8 to 256 whole segments.
- Dimensions accept at most three decimal places.
- Coordinates are stored as 32-bit floating-point values, so small representation differences are possible.
- Only closed convex cuboids and polygonal cylinders are generated.
- Cylinder volume follows its polygonal cross-section.
More details
Binary STL has no enforced measurement units or materials.
The tool does not import or repair arbitrary meshes, add holes, choose slicing settings or verify a physical printed part.
Where your input is processed
This tool does not upload your inputs. See the limits for anything saved on your device.
A valid surface mesh is only one printing input
Closed edges, outward winding and positive volume check the generated geometry. They do not choose layer height, material, supports or printer settings. Inspect the imported scale and sliced preview in the application you use before a physical print.
Questions about Parametric Solid STL Builder
Does STL store millimeters?
No. Entered values use millimeters, but the importing application must use that same interpretation.
Is the cylinder perfectly smooth?
It is a polygonal approximation controlled by segment count.
Does a mesh check guarantee printing?
No. Scale, slicing, material and printer setup remain separate.