Multitrack Audio Mixer

Mix compatible audio tracks with editable offsets, gains and mute values into one WAV.

On-device No sign-up Free to use

Mix tracks controls

  1. 1 Add files
  2. 2 Arrange/Options
  3. 3 Download

Drop your files here

or choose them from your device

2–8 mono/stereo files with matching decoded rates and channel counts. Selected files: 128 MiB total; source durations: 120 seconds combined; decoded float samples: 48 MiB combined. Supported WAV keeps its rate; other supported formats decode at 48 kHz. The timeline, including offsets and muted tracks, must fit 120 seconds and a 24 MiB PCM16 WAV. Use Up/Down to reorder.

    ?

    offset seconds, gain from -60 to +18 dB, mute (0 plays, 1 mutes). Rows follow the displayed file order.

    Result

    Showing an example.

    Make two matching tracks overlap for half a second.

    The PCM16 output lasts 1.500 seconds. Both tracks play during 0.500–1.000 seconds; the project records each offset, gain and mute value.

    Loading the tool. Your result will appear here.

    https://usefreetools.net/multitrack-audio-mixer · 20 November 2026

    Was this helpful?

    How to use Multitrack Audio Mixer

    1. Choose two to eight supported files with the same decoded sample rate and channel count. Their combined duration must fit 120 seconds and decoded samples 48 MiB. Check their file-list order.
    2. Enter one offset, gain and mute row per file in that order. Offsets are seconds from the mix beginning; the full timeline, including muted tracks, must fit 120 seconds.
    3. Mix and listen to overlaps, quiet sections and the ending. Review any global headroom reduction, then download mixed-audio.wav and audio-mix-project.json.

    Example: Multitrack Audio Mixer

    Make two matching tracks overlap for half a second.

    You add
    Two one-second mono WAVs at 48 kHz. Track rows: 0, -6, 0 and 0.5, -6, 0.
    You get
    The PCM16 output lasts 1.500 seconds. Both tracks play during 0.500–1.000 seconds; the project records each offset, gain and mute value.

    Options

    Track rows
    Each row follows the picked file order and stores offset in seconds, gain in dB and mute as 0 or 1. The editable rows and text field use the same values; the renderer checks that there is one row per file.

    Supported inputs and limits

    Selected files128 MiB total
    Combined source length120 seconds
    Decoded source samples48 MiB total
    • Two to eight files with matching decoded sample rates and channel counts.
    • Supported PCM/float32 WAV retains 8–96 kHz mono/stereo; other admitted formats decode at 48 kHz with browser-dependent codec support.
    • The selected files together must fit 128 MiB.
    • Mixing further limits their combined source duration to 120 seconds and decoded samples to 48 MiB.
    • Track offsets are 0–120 seconds, gain -60 to +18 dB, and mute is 0 or 1.
    More details

    The entire rendered timeline must fit 120 seconds and a 24 MiB PCM16 WAV.

    Muted tracks still occupy their timeline span.

    No automatic rate or channel conversion is applied.

    Peaks above sample full scale trigger one global headroom reduction.

    Output omits original metadata.

    Project JSON records settings and source names; there is no project-file import control, and it contains no audio.

    Work stays on your device.

    Native decoding cannot always stop immediately.

    Where your input is processed

    This tool does not upload your inputs. See the limits for anything saved on your device.

    Leave headroom where tracks overlap

    Samples are added after each track gain. Two signals can peak higher together even if each source is below full scale. The tool reports the requested peak and reduces the whole mix by a single headroom gain when needed to fit sample full scale. That adjustment preserves relative track levels, but it is not loudness matching, compression or a true-peak limiter.

    A saved project needs its source files

    The JSON keeps track names, order and settings, rather than embedding audio. Select the same files in the same order when reusing its rows. Muting a track stops its contribution; it does not delete the source or make a long offset fit inside the timeline limit.

    Questions about Multitrack Audio Mixer

    Can I mix recordings with different sample rates?

    The decoded rates and channels must match. Use the WAV converter first when a source layout differs; the mixer does not silently resample or downmix.

    Does the project include my recordings?

    No. The JSON records source names, order and track settings, without the audio. To reproduce the mix, select the same recordings and copy the saved settings into the rows; there is no project-file import control.

    Is my input uploaded?

    Nothing is uploaded.

    Page updated · Project managed by Tony Hines · Report a problem with Multitrack Audio Mixer