How to use Audio Loudness and True-Peak Meter
- Select a 48 kHz PCM WAV or browser-decodable mono/stereo audio lasting at least 0.4 seconds. Choose your LUFS comparison reference.
- Run the measurement. Read integrated loudness, retained block counts, sample peak and estimated true peak together; the comparison does not change your audio.
- Download loudness-report.json and loudness-timeline.csv. Check the delivery requirements before applying gain elsewhere; silence has no finite integrated loudness.
Example: Audio Loudness and True-Peak Meter
See how the meter handles a recording with no signal.
Supported inputs and limits
- The method requires 48 kHz mono/stereo audio, 0.4–600 seconds.
- PCM WAV at other rates is refused; other admitted formats use the browser decoder at 48 kHz.
- Codec support varies.
- Up to 128 MiB and 256 MiB of decoded samples; out-of-range samples are refused.
- The reference is a comparison, not a correction or platform certification.
More details
No multichannel support, loudness-range measurement or EBU Mode claim.
Silence below the gates has no finite loudness.
Work stays on your device.
Where your input is processed
This tool does not upload your inputs. See the limits for anything saved on your device.
Understand what gating leaves out
Integrated loudness uses ITU-R BS.1770-5 K-weighting and absolute/relative gating. Quiet sections below the gates do not contribute in the same way as an ordinary full-file average. Read the declared standard, block counts and gates when comparing reports from different meters.
True peak and sample peak answer different questions
Interpolation estimates peaks between stored samples. That estimate can exceed the largest sample value. The report does not change your WAV or establish compliance with a broadcaster or platform requirement; compare its stated scope with the measurement required for delivery.
Questions about Audio Loudness and True-Peak Meter
Is this a certified broadcast meter?
No. It implements the declared bounded measurement method and reports its limits; it has no certification or full EBU Mode claim.
Can I use a 44.1 kHz recording?
A 44.1 kHz PCM WAV is refused; convert it to 48 kHz before measuring here. Supported compressed formats decode through your browser at 48 kHz, even when their original rate differs. That decoding or resampling can affect the measurement.
Is my input uploaded?
Nothing is uploaded.