Audio Dynamics Processor

Start with speech or quiet-gap settings, adjust the gate and compressor, then listen and review gain reduction.

On-device No sign-up Free to use

Process dynamics controls

  1. 1 Add files
  2. 2 Arrange/Options
  3. 3 Download

Drop your file here

or choose one from your device

Supported PCM WAV or browser-decodable MP3, M4A, Ogg, WebM, FLAC or AAC. Selected files together: 128 MiB, 600 seconds and 256 MiB decoded samples. PCM WAV retains its rate/channels; other formats decode at 48 kHz and retain mono/stereo channels. Metadata is not copied. Decoder support varies and decoding may use more memory than the compressed size.

    ?

    ?

    ?

    ?

    ?

    ?

    Result

    Showing an example.

    Compare a steady tone below the compressor threshold.

    The 1:1 compressor adds no compression. The report states the configured gate and envelope behavior; the output stays one second long.

    Loading the tool. Your result will appear here.

    https://usefreetools.net/audio-dynamics-processor · 20 November 2026

    Was this helpful?

    How to use Audio Dynamics Processor

    1. Choose supported audio and listen to the source. Try Gentle speech, Steadier levels or Quiet gaps as a starting point, then adjust the fields.
    2. Set Quiet gate threshold below wanted quiet sounds. Adjust Compression starts above, ratio, attack and release; a ratio of 1 leaves the separate gate active.
    3. Process and listen to quiet passages and loud changes in the rendered audio. Check gain reduction before raising Volume after compression.
    4. Download dynamics-processed.wav when satisfied. Keep the preset JSON to record settings and gain-reduction.csv to inspect the sampled detector and attenuation report.

    Example: Audio Dynamics Processor

    Compare a steady tone below the compressor threshold.

    You add
    One-second mono WAV at 48 kHz with a 440 Hz sine at amplitude 0.1. Gate: -80 dBFS; compressor threshold: -6 dBFS; ratio: 1; attack: 10 ms; release: 100 ms; makeup: 0 dB.
    You get
    The 1:1 compressor adds no compression. The report states the configured gate and envelope behavior; the output stays one second long.

    Options

    Gate threshold
    The hard gate acts on quiet material below its level threshold. It does not distinguish a useful quiet sound from background noise.
    Compressor threshold and ratio
    Above threshold, the ratio reduces further level growth. A ratio of 1 leaves the compressor at 1:1; it does not disable the separate gate.
    Attack and release
    These millisecond times smooth how the level detector follows rising and falling peaks. They affect transients and the way quiet passages recover.
    Makeup gain
    This dB gain follows dynamics processing. A positive value raises the requested samples; a global headroom reduction may then scale the whole output.

    Supported inputs and limits

    Selected files128 MiB total
    Supported duration600 seconds
    • Supported PCM WAV retains its 8–96 kHz mono/stereo layout.
    • Other admitted audio uses your browser decoder at 48 kHz; codec support varies.
    • Up to 128 MiB, 600 seconds and 256 MiB of decoded samples.
    • Samples outside the supported PCM range are refused.
    • Work stays on your device.
    More details

    Linked-channel peak detection, hard gate and hard-knee compression; no lookahead or true-peak ceiling.

    Output is PCM16 WAV without source metadata.

    No MP3 encoder; starting points are not a noise-removal guarantee.

    Where your input is processed

    This tool does not upload your inputs. See the limits for anything saved on your device.

    Attack and release affect transitions

    Attack controls how quickly the detector follows a rising level; release controls its return. Very short settings can change the sound of transients and pauses. The linked detector uses the loudest channel so one stereo side does not receive unrelated compression.

    Makeup gain can undo headroom

    Makeup gain raises the processed samples after compression. If that requests peaks above sample full scale, the render applies a global headroom reduction. It still does not make the compressor threshold a hard true-peak ceiling: detector smoothing has no lookahead protection, and peaks between stored samples are a separate concern. Check the reported processing and listen to transitions.

    Questions about Audio Dynamics Processor

    Will it remove every background noise?

    No. A gate reduces quiet sections based on level. Noise mixed with wanted audio can remain.

    Does the compressor threshold guarantee a peak ceiling?

    No. Attack/release smoothing and makeup gain can produce higher peaks. It has no lookahead limiter.

    Is my input uploaded?

    Nothing is uploaded.

    Page updated · Project managed by Tony Hines · Report a problem with Audio Dynamics Processor