Sheet Cutting Optimizer

Arrange rectangular sheet parts with kerf, margins, grain direction and rotation restrictions.

On-device No sign-up Free to use

Arrange sheet cuts controls

Showing an example. Edit to see your own.

?

All dimensions use this unit. Re-enter dimensions and any area-based coverage when changing units.

?

?

?

?

?

One row per line; columns separated by |: name | width | height | count | rotate | grain. Up to 100 rows. Use plain decimals, without thousands separators.

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

Four 0.5 by 0.8 meter shelves on 1.22 by 2.44 meter stock with grain, margins and saw kerf.

1 sheet in this layout

https://usefreetools.net/sheet-cutting-optimizer · 20 November 2026

Was this helpful?

How to use Sheet Cutting Optimizer

  1. Choose one length unit, then enter stock width X, length Y, kerf between parts and unusable margin on every edge. Changing units does not convert numbers.
  2. Set stock grain along Y or choose no grain constraint. Enter each part as name | width | length | count | rotate | grain.
  3. Use yes or no for rotation and length or none for part grain. A length-grain part requires declared stock grain and cannot rotate, even if rotate says yes.
  4. Arrange and review every part’s sheet, position and cut size. Download calculation.csv and layout-plan.json, then check physical cutting access and order.

Example: Sheet Cutting Optimizer

Four 0.5 by 0.8 meter shelves on 1.22 by 2.44 meter stock with grain, margins and saw kerf.

You add
unit: m; width: 1.22; height: 2.44; kerf: 0.003; margin: 0.01; stockGrain: length; parts: Shelf | 0.5 | 0.8 | 4 | yes | length
You get
1 sheet in this layout

Supported inputs and limits

  • Up to 100 part rows, 100,000 list characters and 200 expanded parts.
  • Positive stock/part dimensions, nonnegative kerf and margins use at most six decimal places in the chosen unit.
  • The first-fit decreasing guillotine heuristic reserves edge margins and gaps between parts, then validates bounds and pairwise spacing.
  • Only axis-aligned rectangular parts are supported.
  • It may use more sheets than another layout and does not optimize irregular nesting.
More details

Saw access, clamping, defects and a machine-specific cutting sequence still require review.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Questions about Sheet Cutting Optimizer

Can a grain-sensitive part rotate?

No. A part labeled length keeps its length along the stock grain. Only parts with no grain requirement and explicit rotation permission may turn.

How are overlaps prevented?

The placement engine splits free space into disjoint guillotine regions. A separate check validates every bound and pairwise kerf gap before output.

Is this a machine-ready cut program?

No. Coordinates describe a feasible heuristic layout. Clamping, saw access, stock defects and the machine-specific cut sequence need review.

Page updated · Project managed by Tony Hines · Report a problem with Sheet Cutting Optimizer