Linear Cutting Optimizer

Allocate required lengths to available stock with explicit kerf, offcuts and unplaced parts.

On-device No sign-up Free to use

Allocate linear cuts controls

Showing an example. Edit to see your own.

?

All dimensions use this unit. Re-enter dimensions and any area-based coverage when changing units.

?

One row per line; columns separated by |: name | length | count. Up to 100 rows. Use plain decimals, without thousands separators.

?

One row per line; columns separated by |: length | count. Up to 100 rows. Use plain decimals, without thousands separators.

?

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

Three 1.2 meter rails and two 0.7 meter braces cut from three available 3 meter stock pieces.

2 stock pieces used; 0 parts unplaced

https://usefreetools.net/linear-cutting-optimizer · 20 November 2026

Was this helpful?

How to use Linear Cutting Optimizer

  1. Choose one length unit before entering values. Use name | length | count for required parts and length | count for available stock, with one row per type.
  2. Enter the saw kerf in the same unit, with at most six decimal places. Include any end-trim allowance in your usable stock length yourself.
  3. Allocate cuts and inspect every stock piece, kerf and remaining offcut. An unplaced part means this allocation failed to place it, not that no possible allocation exists.
  4. Download calculation.csv and layout-plan.json. Check the cutting order and physical stock before using the plan.

Example: Linear Cutting Optimizer

Three 1.2 meter rails and two 0.7 meter braces cut from three available 3 meter stock pieces.

You add
unit: m; parts: Rail | 1.2 | 3 Brace | 0.7 | 2; stocks: 3 | 3; kerf: 0.003
You get
2 stock pieces used; 0 parts unplaced

Supported inputs and limits

  • Up to 100 rows per list, 100,000 characters per list, 500 expanded parts and 500 available stock pieces.
  • Positive lengths are at most 1,000,000 selected units and use an exact six-decimal grid.
  • Kerf may be zero.
  • Changing the unit does not convert existing numbers.
  • Best-fit decreasing tries existing offcuts before the shortest fitting unused stock.
More details

It does not guarantee minimum stock use or least waste.

Each separating cut consumes kerf unless the part exactly fills the remaining stock.

End trims, joints and stock defects are not inferred.

Another allocation may place parts that this heuristic leaves unplaced.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Questions about Linear Cutting Optimizer

When is a kerf charged?

Every separating cut reserves the entered kerf. A part that exactly fills the remaining stock needs no additional stock-end kerf.

What does unplaced mean?

The current heuristic could not place the part in the entered available stock. A different allocation may still work; this is not an impossibility proof.

Does the tool guarantee the least waste?

No. It uses best-fit decreasing, considering existing offcuts before the shortest fitting unused stock. The exported plan shows the actual allocation.

Page updated · Project managed by Tony Hines · Report a problem with Linear Cutting Optimizer