Brick, Block and Mortar Estimator

Estimate wall units after openings, with entered joints, waste and mortar product yield.

On-device No sign-up Free to use

Estimate masonry quantities controls

Showing an example. Edit to see your own.

?

All dimensions use this unit. Re-enter dimensions and any area-based coverage when changing units.

?

One row per line; columns separated by |: width | height | openingArea | count. Up to 100 rows. Use plain decimals, without thousands separators.

?

?

?

?

?

?

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

A 5 by 2.4 meter wall with 2 square meters of openings and the displayed solid-unit dimensions.

652 units, 13 mortar bags

https://usefreetools.net/brick-block-mortar-estimator · 20 November 2026

Was this helpful?

How to use Brick, Block and Mortar Estimator

  1. Choose one length unit. Enter each wall’s width, height, opening area and count; opening area uses the square of that unit and is per wall before the count is applied.
  2. Enter the brick or block face length, face height, wall depth and joint thickness in the selected length unit.
  3. Enter extra units and mortar as a percentage. Set the mixed mortar yield per bag in liters, using the product information.
  4. Calculate and review net wall area, units before waste, whole units and mortar bags. Download the result table if needed.

Example: Brick, Block and Mortar Estimator

A 5 by 2.4 meter wall with 2 square meters of openings and the displayed solid-unit dimensions.

You add
unit: m; walls: 5 | 2.4 | 2 | 1; length: 0.215; height: 0.065; depth: 0.1025; joint: 0.01; waste: 10; yield: 15
You get
652 units, 13 mortar bags

Supported inputs and limits

  • Up to 100 wall rows in a list of at most 100,000 characters.
  • Enter plain decimals without thousands separators.
  • Opening area cannot exceed its wall’s width × height.
  • Changing the unit does not convert existing entries.
  • The model uses one unit size in a single rectangular wall leaf.
More details

Unit count divides net wall area by (unit length + joint) × (unit height + joint).

Mortar fills full-depth bed and vertical joints around modeled solid units.

Extra stock applies to units and mortar before whole units and bags round up.

Edge courses, hollow cores, reinforcement, bonding details and structural design are excluded.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Questions about Brick, Block and Mortar Estimator

How are joints included in the unit count?

The modular face is unit length plus a joint multiplied by unit height plus a joint. The net wall face is divided by that area.

Does the mortar estimate fill hollow block cores?

No. It models full-depth joints around solid rectangular units. Hollow cores, reinforcement and grouting need separate quantities.

Does waste change the wall dimensions?

No. It adds a percentage to the modeled unit count and mortar quantity, then whole units and product bags round up.

Page updated · Project managed by Tony Hines · Report a problem with Brick, Block and Mortar Estimator