Area Converter

Convert a land or surface area between metric and international units.

On-device No sign-up Free to use

Convert the area controls

Showing an example. Edit to see your own.

?

A plain number, for example 42.5.

?

Hectares and international acres are separate named units, not interchangeable ones.

More options
?

Display rounding does not change the conversion. Tiny nonzero results remain visible.

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

Convert Hectares (ha) to Square meters (m²).

2.5 ha is 25,000 m².

https://usefreetools.net/area-converter · 20 November 2026

Was this helpful?

How to use Area Converter

  1. Enter the area you already know. For a room, calculate length × width first, with both lengths in the same unit.
  2. Choose Convert from and Convert to. International acres (ac) and hectares (ha) are separate units.
  3. Choose 4, 6, 10 or 12 significant digits for display.
  4. Read the converted area and Factor line; the reference table helps compare other units.

Example: Area Converter

Convert Hectares (ha) to Square meters (m²).

You add
Value: 2.5; Convert from: Hectares (ha); Convert to: Square meters (m²); Significant digits in displayed results: 6.
You get
2.5 ha is 25,000 m².

Options

Convert to
Hectares and international acres are separate named units and are never swapped for each other. Square inches, feet, yards and miles use the international definitions, not the older US survey-foot variants.
Significant digits in displayed results
Set 4, 6, 10 or 12 significant digits for the area answer. Grouped digits make large land areas easier to read, while small square-unit results remain nonzero.

Supported inputs and limits

  • Supports square millimeters, centimeters, meters and kilometers, hectares, and international square inches, feet, yards, miles and acres.
  • The absolute entered value cannot exceed 1 quadrillion in its selected unit.
  • Bigha, rai, tsubo and US survey-foot areas are not included.
  • Factors use exact decimal definitions and arithmetic runs at 60 significant digits before display rounding.
  • Converting a measured area cannot improve the accuracy of the original measurement.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Land units that look alike and are not

Different countries measure land with units that share names but not sizes. A hectare is a metric area of 10,000 square meters. An acre is 43,560 square feet, defined from the international foot. The tool keeps each name on the controls and the result so one cannot quietly become the other, and it leaves regional units out rather than guessing a size.

Questions about Area Converter

Why is a hectare not the same as an acre?

A hectare is 10,000 square meters. An international acre is 43,560 square feet, about 4,046.856422 square meters, so an acre is a little under half a hectare.

Why is the area factor the length factor squared?

Area scales in two directions. One meter is 100 centimeters, so one square meter is 100 times 100, or 10,000 square centimeters. The tool stores squared factors directly instead of multiplying a rounded length.

Which acre does the tool use?

The international acre, defined as 43,560 international square feet. Acres based on the older US survey foot are a different size and are not silently substituted.

Can I convert a room measured in feet to square meters?

Yes. Enter the area in Square feet (ft²), choose Square meters (m²), and select the significant digits to display. More digits do not make the original floor or land measurement more accurate.

Can a small result show as zero?

No. A tiny nonzero result stays nonzero at the selected precision. Significant-digit output may use scientific notation instead of printing every decimal place.

Page updated · Project managed by Tony Hines · Report a problem with Area Converter

Related reading

All guides