Wallpaper Roll Calculator

Allocate pattern-aligned wallpaper drops to usable rolls, including trim and spare drops.

On-device No sign-up Free to use

Allocate wallpaper rolls controls

Showing an example. Edit to see your own.

?

All dimensions use this unit. Re-enter dimensions and any area-based coverage when changing units.

?

One row per line; columns separated by |: width | height | count. Up to 100 rows. Use plain decimals, without thousands separators.

?

?

?

?

?

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

One 4 meter wall, 2.4 meters high, using a 0.53 meter roll with a 0.64 meter repeat and one spare drop.

3 rolls for 9 drops

https://usefreetools.net/wallpaper-roll-calculator · 20 November 2026

Was this helpful?

How to use Wallpaper Roll Calculator

  1. Choose one length unit and enter walls as width | height | count. Set roll width and usable roll length after damaged ends; changing units does not convert numbers.
  2. Enter the total top-and-bottom trimming allowance for each drop, then the vertical straight-match pattern repeat. Use 0 repeat for plain paper.
  3. Add whole spare drops if needed. Each spare uses the tallest calculated cut length; walls keep full-height drops across doors and windows.
  4. Calculate and review cuts and unused length for every roll. Download calculation.csv and layout-plan.json, then check the wall-specific hanging pattern and seam positions.

Example: Wallpaper Roll Calculator

One 4 meter wall, 2.4 meters high, using a 0.53 meter roll with a 0.64 meter repeat and one spare drop.

You add
unit: m; walls: 4 | 2.4 | 1; rollWidth: 0.53; rollLength: 10.05; trim: 0.1; repeat: 0.64; spare: 1
You get
3 rolls for 9 drops

Supported inputs and limits

  • Up to 100 wall rows in at most 100,000 characters, 0 to 100 spare drops and 2,000 total drops including spares.
  • Use plain decimal dimensions in one length unit.
  • Every complete pattern-aligned drop must fit the usable roll length.
  • For straight matching, wall height plus total trim rounds up to the next whole pattern repeat.
  • Drop counts round up separately for each wall width.
More details

Openings are not deducted.

First-fit decreasing allocates whole drops but does not prove the minimum roll count.

Half-drop offsets, defects beyond the entered usable length, seam positions and reuse around openings need a separate hanging plan.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Questions about Wallpaper Roll Calculator

Why can area division underestimate rolls?

A complete height-length drop must fit in a roll. An area total cannot use a short remainder to make a full drop.

Can I deduct windows and doors?

This planner keeps full-height drops across openings. Useful remnants and seam positions need a separate wall-specific hanging plan.

Is the roll allocation the fewest possible?

Not necessarily. First-fit decreasing produces a feasible allocation, but it is a heuristic rather than proof of the minimum roll count.

Page updated · Project managed by Tony Hines · Report a problem with Wallpaper Roll Calculator