Viscosity Converter

Convert dynamic or kinematic viscosity, supplying density explicitly when moving between the two quantities.

On-device No sign-up Free to use

Convert value controls

Showing an example. Edit to see your own.

?

A plain number such as 100 or 1.6e-3. A negative viscosity is not a physical value and is refused.

?

Dynamic units measure force per area per shear rate; kinematic units are dynamic viscosity divided by density.

?

Used only when the two units are from different families, where kinematic viscosity is dynamic viscosity divided by this density.

More options
?

Display rounding does not change the conversion. Tiny nonzero results remain visible.

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

Convert Centipoise (cP) to Centistokes (cSt).

1 cP at 1,000 kg/m³ is 1 cSt.

https://usefreetools.net/viscosity-converter · 20 November 2026

Was this helpful?

How to use Viscosity Converter

  1. Enter the viscosity and select its source unit.
  2. Choose the output unit. If it changes between dynamic and kinematic viscosity, check or replace the density in kg/m³ for the same fluid and conditions.
  3. Convert and read the result and density note. Keep the viscosity unit and measurement conditions with the value.

Example: Viscosity Converter

Convert Centipoise (cP) to Centistokes (cSt).

You add
Value: 1; Convert from: Centipoise (cP); Convert to: Centistokes (cSt); Fluid density (kg/m³): 1000; Significant digits in displayed results: 6.
You get
1 cP at 1,000 kg/m³ is 1 cSt.

Options

Fluid density
Density in kg/m³ is used only when crossing between dynamic and kinematic viscosity. The starting value of 1,000 kg/m³ is an example, not a density selected for your fluid. It is ignored for a scale conversion within one viscosity type.
Significant digits in displayed results
Choose 4, 6, 10 or 12 significant digits for viscosity. Conversions between dynamic and kinematic quantities continue to use your entered density.

Supported inputs and limits

Dynamic and kinematic units are distinct. Cross-type conversion requires positive entered density and uses ν = μ/ρ. No material lookup, temperature correction or non-Newtonian flow model is included. Very large or overly precise entries may be refused; see Technical limits.
  • Dynamic and kinematic units are distinct.
  • Cross-type conversion requires positive entered density and uses ν = μ/ρ.
  • No material lookup, temperature correction or non-Newtonian flow model is included.
  • Values accept at most 64 characters, 40 significant digits, 20 fractional places and magnitude 10¹⁸.
  • Scientific notation has at most two exponent digits.
More details

Display rounding offers 4, 6, 10 or 12 significant digits; small nonzero results stay visible.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Dynamic and kinematic viscosity differ

Kinematic viscosity equals dynamic viscosity divided by density. At 1000 kg/m³, 1 cP gives 1 cSt. A different density changes that relationship, and temperature can change both properties; enter compatible measurements.

Questions about Viscosity Converter

Can I convert cP to cSt without density?

No. Kinematic viscosity is dynamic viscosity divided by density. The form starts at 1,000 kg/m³; check or replace that value for your fluid and conditions. It is not a material lookup.

What unit should the density use?

Enter kilograms per cubic metre. Convert a density quoted in g/cm³ or another unit before using it here.

Will this tell me a fluid’s viscosity at another temperature?

No. It uses your entered value and density. Both should describe the same material conditions.

Page updated · Project managed by Tony Hines · Report a problem with Viscosity Converter