Tire Size Comparison

Compare nominal metric radial tire dimensions and simplified speedometer effects.

On-device No sign-up Free to use

Compare tire sizes controls

Showing an example. Edit to see your own.

?

?

?

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

Compare 205/55R16 with 225/45R17 at an indicated speed of 100.

0.38% nominal circumference change

https://usefreetools.net/tire-size-comparison · 20 November 2026

Was this helpful?

How to use Tire Size Comparison

  1. Enter bare metric radial sizes such as 205/55R16 and 225/45R17. Leave out P/LT prefixes, spaces and load/speed suffixes; this parser does not accept those full markings.
  2. Enter an indicated speed greater than 0 and no more than 500. Use one common speed unit, such as km/h or mph; the compared speed keeps that unit.
  3. Calculate and compare nominal sidewall, diameter and circumference in millimeters, then review radius change and the simplified speed ratio.
  4. Download calculation.csv if needed. Check vehicle and tire specifications separately; a small circumference difference is not approval to fit the tire.

Example: Tire Size Comparison

Compare 205/55R16 with 225/45R17 at an indicated speed of 100.

You add
original: 205/55R16; replacement: 225/45R17; speed: 100
You get
0.38% nominal circumference change

Supported inputs and limits

  • Metric radial sizes only: section width 125 to 405 mm, aspect ratio 20% to 85%, and rim diameter 10 to 30 inches, including half-inch sizes.
  • The entered speed is positive and at most 500.
  • Load/speed codes and commercial flotation notation are not parsed.
  • Speed comparison assumes exact speedometer calibration to the original nominal circumference.
  • Loaded rolling radius, pressure, tread wear and instrument calibration differ in use.
More details

Dimensions alone do not establish rim compatibility, clearance, load capacity, handling, legality or safe fitment.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Questions about Tire Size Comparison

What does the size notation describe?

The first number is nominal section width in millimeters, the second is sidewall height as a percentage of width, and R is followed by rim diameter in inches.

How is the speed comparison calculated?

Entered indicated speed is multiplied by comparison circumference divided by original circumference, assuming exact calibration to the original nominal size.

Does a small difference prove that a tire fits safely?

No. Load rating, rim width, clearances, rolling radius, vehicle systems and legal requirements need separate checks.

Page updated · Project managed by Tony Hines · Report a problem with Tire Size Comparison