How to use Capacitance Converter
- To convert a number, leave Capacitor code empty, enter the nominal capacitance and choose its source unit.
- To decode a marking instead, enter a three-digit code that uses the supported picofarad rule. The code replaces the numeric value and source-unit choice.
- Choose the target unit and display precision, then read the conversion and input-interpretation details. Check the component datasheet for tolerance, voltage and any different marking convention.
Convert 100 nF to microfarads
Convert the nominal capacitance printed on a component.
Options
- Capacitor code
- An entered three-digit code replaces the numeric value and source unit. The first two digits form a coefficient in pF and the third is a decimal exponent.
- Significant digits in displayed results
- Display capacitance with 4, 6, 10 or 12 significant digits. A decoded capacitor marking is a nominal value and does not establish tolerance or measured capacitance.
Supported inputs and limits
- Supported numeric markings use the first two digits followed by a decimal multiplier in pF.
- No letter codes, voltage rating, tolerance, polarity or package identification is inferred.
- Values accept at most 64 characters, 40 significant digits, 20 fractional places and magnitude 10¹⁸.
- Scientific notation has at most two exponent digits.
- Display rounding offers 4, 6, 10 or 12 significant digits; small nonzero results stay visible.
Where your input is processed
This tool does not upload your inputs. See the limits for anything saved on your device.
Read a 104-style capacitor code
Under the supported rule, code 104 means 10 x 10^4 pF: 100,000 pF, 100 nF or 0.1 microfarad. Confirm that the component uses this rule before applying the result. The decoder does not identify a manufacturer, interpret every alternative marking scheme or establish tolerance and voltage ratings. Leave the code field empty when converting a numeric value.
Questions about Capacitance Converter
Why does 104 mean one hundred nanofarads?
The first two digits give 10 and the last gives a factor of 10⁴. That is 100000 pF, equivalent to 100 nF.
Can I read a voltage rating from the code?
No. The supported code describes nominal capacitance only. Check the component’s separate marking or datasheet.
Does a nominal conversion tell me the measured value?
No. Actual capacitance can vary with tolerance and operating conditions. The page converts the entered nominal value.