Reorder Point and Safety Stock Planner

Model a reorder threshold from daily demand, lead time, variability and entered inventory position.

On-device No sign-up Free to use

Calculate reorder threshold controls

Showing an example. Edit to see your own.

?

?

?

?

?

This is a model parameter, not a promised service level.

?

?

?

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

Mean lead-time demand is 20 × 7 = 140 units. The entered variation and z give about 39.565 model safety units, producing a 180-unit threshold. Inventory position is 100 + 20 − 0 = 120, leaving a 60-unit gap, not a prescribed order quantity.

At or below reorder threshold of 180 units

https://usefreetools.net/reorder-point-safety-stock · 20 November 2026

Was this helpful?

How to use Reorder Point and Safety Stock Planner

  1. Enter Mean demand per day and its Daily demand standard deviation in units for one day. Enter Mean lead time and its standard deviation in days; do not mix weekly demand with daily lead-time units.
  2. Enter the service factor z you intend to model. It is a parameter for this approximation, not a promised stock-availability percentage.
  3. Enter whole-unit quantities On hand, Already on order and Backordered. Inventory position is on hand + on order − backorders, which can differ from shelf stock.
  4. Select Calculate result. The mean lead-time demand and model safety stock are combined before one whole-unit threshold is produced. Equality counts as At or below the threshold.
  5. Review Gap up to threshold as a comparison only, not a recommended order size. Download calculation.csv for the five result measures; supplier packs, EOQ and capacity remain separate decisions.

Example: Reorder Point and Safety Stock Planner

Mean lead-time demand is 20 × 7 = 140 units. The entered variation and z give about 39.565 model safety units, producing a 180-unit threshold. Inventory position is 100 + 20 − 0 = 120, leaving a 60-unit gap, not a prescribed order quantity.

You add
demand: 20; demandSd: 5; lead: 7; leadSd: 1; z: 1.65; onHand: 100; onOrder: 20; backorders: 0
You get
At or below reorder threshold of 180 units

Supported inputs and limits

  • Daily mean demand and its standard deviation are nonnegative and at most 1,000,000 units.
  • Mean lead time must be positive and no more than 3,650 days; lead-time standard deviation is 0 to 3,650 days.
  • Service factor z is 0 to 5.
  • On-hand, on-order and backordered quantities are whole numbers from 0 to 1,000,000,000 each.
  • Use ordinary decimals with up to 12 decimal places, without grouping commas or currency symbols.
More details

The calculated whole-unit threshold must also remain within 1,000,000,000; some combinations of individually allowed large inputs exceed that result bound and are refused.

The model assumes independent daily demand and lead time, stationary inputs and a normal approximation.

Correlation, seasonal changes, supplier reliability and actual service probabilities are not assessed.

There is no automatic history import, inventory connection or order placement.

Processing is local without automatic saving.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

A threshold comparison is not an order size

Mean lead-time demand = mean daily demand × mean lead time. Model safety stock = z × √(mean lead time × daily demand variance + mean daily demand² × lead-time variance). The combined mean and safety amount supplies the rounded threshold. The gap only compares that threshold with your entered inventory position; it does not choose how many packs to order or calculate a delivery date.

Questions about Reorder Point and Safety Stock Planner

What is inventory position?

On-hand units plus units already on order minus backordered units. It differs from shelf stock when orders or backorders exist.

Does the service factor guarantee availability?

No. It is an entered normal-model factor. Real demand and lead-time distributions may not meet the independence and stationary-input assumptions.

Is the gap to threshold a recommended order quantity?

No. It only shows how far inventory position is below the modeled threshold. EOQ, supplier minimums and pack sizes are separate decisions.

Page updated · Project managed by Tony Hines · Report a problem with Reorder Point and Safety Stock Planner