Battery and UPS Runtime Calculator

Estimate battery or UPS runtime from usable energy, output load, efficiency and idle draw.

On-device No sign-up Free to use

Estimate battery runtime controls

Showing an example. Edit to see your own.

?

?

Required with Ah capacity. Ignored with Wh capacity. Use total bank voltage and capacity, not a sum of parallel voltages.

?

?

?

?

Processed in your browser. Your inputs stay on this device.

Result

Showing an example.

A 12 volt, 100 Ah bank with 80% usable capacity, 90% conversion efficiency and 200 watts of output load.

4.133971 hours estimated

https://usefreetools.net/battery-ups-runtime-calculator · 20 November 2026

Was this helpful?

How to use Battery and UPS Runtime Calculator

  1. Choose Ah or Wh. For Ah, enter the total bank’s nominal voltage; voltage is ignored when capacity is already in Wh.
  2. Enter usable capacity and conversion efficiency as percentages. Use values appropriate to the product and your scenario.
  3. Enter output load in watts, then any additional battery-side idle draw. Avoid adding idle losses twice if your efficiency figure already includes them.
  4. Calculate, review usable Wh and battery-side watts, and download the table if needed. Compare the estimate with the manufacturer’s runtime curve.

Example: Battery and UPS Runtime Calculator

A 12 volt, 100 Ah bank with 80% usable capacity, 90% conversion efficiency and 200 watts of output load.

You add
capacityUnit: Ah; capacity: 100; voltage: 12; usable: 80; efficiency: 90; load: 200; idle: 10
You get
4.133971 hours estimated

Supported inputs and limits

  • Use plain decimal numbers without thousands separators.
  • Capacity and output load must be positive; usable capacity and efficiency must be greater than zero and no more than 100%.
  • The calculation assumes constant nominal voltage, load and efficiency: runtime = usable Wh ÷ (output watts ÷ efficiency + idle watts).
  • Temperature, aging, discharge-rate effects, surge limits and cut-off behavior are not modeled.
  • It does not size cables, select battery chemistry or establish safe electrical operation.
More details

A manufacturer’s measured runtime curve may differ.

Where your input is processed

This tool does not upload your inputs. See the limits for anything saved on your device.

Questions about Battery and UPS Runtime Calculator

Why does efficiency increase battery-side watts?

The battery must supply output watts divided by efficiency. The entered inverter or UPS idle draw is then added on the battery side.

Do Wh and Ah mean the same thing?

No. Wh is energy. Ah becomes a nominal energy estimate only when multiplied by the entered battery-bank voltage.

Will runtime match a manufacturer curve?

Not necessarily. Temperature, aging, discharge rate, cut-off voltage and load surges are excluded from this constant-load scenario.

Page updated · Project managed by Tony Hines · Report a problem with Battery and UPS Runtime Calculator